Laser Tag Vest

Laser Tag Vest

Laser Tag Vest is a hit sensor device that can be used with or without the Laser Tag Headband.

The vest has 8 hit sensors: 4 on the front, 2 on the back and 2 on the shoulders (1 on each shoulder).

The most interesting feature of using the Laser Tag Vest with Headband is that you can use the factor of damage reduction for one of the hit devices.

For example, hitting the body in military simulation usually means wounding, that's why you can set damage factor to be lower for vest hits compared to headshots. This way, the player that is hit in the chest/back or shoulder does not receive full damage, but only part of it. Changing the damage coefficient can be made using the Laser Tag Configurator in "Additional Equipment".

To do this, start the Laser Tag Configurator, turn on the vest, wait till it connects to the PC via Bluetooth. Select “damage factor” in the Laser Tag Configurator (0.2 / 0.4 / 0.6 / 0.8 / 1.0) and click "Record". The recording of damage factor parameters will be accompanied with short beeps, the amount of which depends on the selected factor - 1/2/3/4/5, respectively.

You can buy Laser Tag Vests in our online store.

Laser Tag Vests

 

Laser Tag Vest and Laser Tag Gun connection sequence for 8-9th generations

- Vest and Gun (no Headband)

1. Turn on the gun.
2. Turn on the vest.
3. Wait for their connection (Vest will beep, followed by flickering and vibro-indication).
4. Activate your set with a remote control or MedKit-family devices.

- Headband + Vest and Gun

1. Turn on the gun.
2. Turn on the vest.
3. Turn on the headband.
4. Wait for their connection. (Vest and headband will beep, followed by flickering and vibro-indication)
5. Activate your set with the remote control kit or MedKit-family devices.

- Vest and 2 Guns

1. Turn on the first gun.
2. Turn on the laser tag vest.
3. Wait for their connection.
4. Turn on the second gun.
5. Wait for latter’s connection with the vest (within a short time, the vibro signal will stop).
6. Activate your set with the remote control kit or MedKit-family devices.

- Headband + Vest and 2 Guns

1. Turn on the first gun.
2. Turn on the vest.
3. Turn the first switch on the headband.
4. Wait for their connection.
5. Turn on the second gun.
6. Turn on the second switch on the headband.
7. Wait for their connection (single sound and vibro-indication of the headband).
8. Activate your set with the remote control kit or MedKit-family devices.